New Arrivals/Restock

Jabsco, Oil Changing System, 12 volt. Installed in a vesselÕs engine room with it's manifold and valves permanently plumbed to the vesselÕs engine oilpans or transmission oil sumps.

• Universal Use (Metric or US Customary Units)
• Bronze body
• Nitrile impeller, nitrile lip type seal
• 1/2" NPT full flow ball type valve
• Motor: Reversible permanent magnet with integral reversing switch, complies with USCG 183.410 and ISO 8846 Marine
• Dimensions: 15.9 x 27.6 x 26 (cms), 6-1/4" x 10-7/8" x 10-3/16"

The manifold is factory fitted with three ball valves to serve three different oil reservoirs and may be fitted with two additional ball valves to drain up to five oil reservoirs. The system can be used to remove old oil from an engine or transmission, then reversed with the integral reversing switch, to pump a measured amount of new oil back into the engine or transmission. Each connection to an engine is controlled by a dedicated full flow ball valve. The systemÕs cover provides an attractive appearance, fully shrouding the entire pump and manifold system. It also provides added protection against accidental draining of an engineÕs oil supply because the valve cover protects the factory supplied valves from being accidentally bumped open. Additionally, at the end of an oil change, the cover will not close unless the factory supplied valves are in the fully closed position. JabscoPDF)